Plant Constructions

Anti-corrosion protection in plant construction

Chemical plants, refineries, steel production, thermal power plants – in all areas of heavy industry protection from corrosion is required under difficult conditions for storage tanks , pipelines, heat exchangers etc. Often, chemicals as well as high temperatures  also affect the coating film.

Rembrandtin offers a wide range of tested products with numerous innovations to protect valuable assets in industrial plants.

EPOXY 61 S PRIMER

EPOXY 61 S PRIMER

Epoxy-resin-combination primer for steel

Colours: Beige, grew, approx. RAL 3012

High-quality primer with high corrosion protection

Epoxy 61 S Primer Trafo

Epoxy 61 S Primer Trafo

2 comp. waterborne primer

Colours: approx. RAL 1015 and RAL 3012

Epoxy-resin-combination primer for general industry

REM RA 66

REM RA 66

Thickened 2-component vinyl ester one-coat lacquer.

Colours: white, light grey

Coating with high abrasion resistance. Very high resistance to acid and temperatures, above all excellently suited for the coating of REAs, flue gas ducts, steel chimneys etc.

REM RA 73

REM RA 73

Water-based temporary corrosion protection coating.

Colours: transparent

Transparent water-based air-drying, non-thermoplastic alkyd resin coating for temporary corrosion protection, free of alkali metals, therefore no damage to the catalysator when burned off.

REMOPLAST MSR PRIMER ZO

REMOPLAST MSR PRIMER ZO

Quick drying, low VOC 2-component Epoxy-based high build special coat.

Colours: red-brown

According OMV standard 1670 P.

Contains more than 25% Zinc Phosphate in relation to the pigment/filler content.

Contains lamellar, micaceous iron oxid for maximal seal against diffusion.

REMOPLAST MSR TL GLIMMER

REMOPLAST MSR TL GLIMMER

Quick drying, low VOC 2-component Epoxy-intermediatecoating.

Colours: light-grey, grey

Contains lamellar, micaceous iron oxid Pigments for maximal seal against diffusion.

REMOPLAST MSR TRAFO

REMOPLAST MSR TRAFO

Quick drying, low VOC 2-component Epoxy-based high build special coat. Transformer oil resistant.

Colours: RAL 9002

REMOPLAST Solventfree DS Airless

REMOPLAST Solventfree DS Airless

airless quality is a solvent-free, 2-component polyurethane liquid plastic used for the thick-film corrosion protection of steel surfaces, steel troughs and for steel container construction.

Colours: Olive yellow (further colours on request)

REMOPLAST UVC GLIMMER

REMOPLAST UVC GLIMMER

2K top coating on hydroxyl-group acrylic resin/aliphatic isocyanate-base (polyurethane) with MIO or micaceous pigments

Colours: RAL, NCS

"Satin-gloss, solid-particle-containing top coat, good colour and gloss stability, good chemical resistance According to TL/TP-KOR, sheet 87. High elasticity with good mechanical resistance/abrasion resistance also for all systems in the chemical industry up to 120 °C and for traffic structures (up to corrosiveness class C5 acc. EN ISO 12944/2)"

Certifications:
- RVS_Zulassungsurkunden_11.pdf
- OMV_RefStd_1670_004_01_CS1_01.pdf
- Reinraum_MWZ_03.pdf

REMOPLAST UVC PL HS ES

REMOPLAST UVC PL HS ES

High Solid 2 comp. single based on hydroxyl group containing acryl resins and aliphatic isocyanates with anticorrosive and lamellar pigment. Good resistance to yellowing.

Colours: RAL

Good color shade, high elasticity with very good mechanical strength / abrasion resistance.

Certifications:
- Zulassung_010-037616_-_C5H_03.pdf
- Zulassung_010-037617_-_C4H_01.pdf
- Zulassung_010-037618_-_C3H_01.pdf

REMOSIL OM 101

REMOSIL OM 101

1-component ethyl silicate-based zinc dust primer coating with fast drying. Heat resistant up to 400C, very good corrosion protection.

Colours: grey

At film thickness of up to 100 µm there exists no risk of cracking. Approved for anti-slip screw connections according to DB-TL 918300 Part 2, Sheet 85.

Certifications:
- RVS_Zulassungsurkunden_09.pdf

REMOSIL OM 500

REMOSIL OM 500

1-component ethyl silicate-based zinc dust primer coating with fast drying. Heat resistant up to 500C, very good corrosion protection.

Colours: grey

At film thickness of up to 100 µm there exists no risk of cracking.

REMOSIL S ALU RAL 9006

REMOSIL S ALU RAL 9006

High heat resistant, silicon resin-based intermediate and top coat, pigmented with aluminium.

Colours: RAL 9006

Particularly good temperature-change resistance and mechanical strength. With subsequent heating REMOSIL S ZINK also brings with it the advantage, that it remains non-adhesive in all temperature ranges. With Remosil OM 500 to 500C, can be stressed up to 600C without primer.

REMOSIL S GLIMMER CA. RAL 9007

REMOSIL S GLIMMER CA. RAL 9007

High heat resistant, silicon resin-based intermediate and top coat, pigmented with micaceous iron oxide

Colours: RAL 9007

Particularly good temperature-change resistance and mechanical strength. With subsequent heating REMOSIL S ZINK also brings with it the advantage, that it remains non-adhesive in all temperature ranges. With Remosil OM 500 to 500C, can be stressed up to 600C without primer.

REMOSIL S ZINC

REMOSIL S ZINC

High heat resistant, silicon resin-based primer coating, can be stressed up to approx. 400°C.

Colours: grey

Particularly good temperature-change resistance and mechanical strength. With subsequent heating REMOSIL S ZINC also brings with it the advantage, that it remains non-adhesive in all temperature ranges.