Infrastructure Constructions

Road and railway bridges

Infrastructure constructions such as road and railway bridges, noise protection walls, toll gantries, and the like are part of our mobility. They have to be conserved and protected from atmospheric and chemical stress for a long service life in adverse conditions of moisture, exhaust gases, road salt attacks etc.

In this sector, Rembrandtin, as a market leader, contributes by developing and producing tested and approved coating systems in accordance with RVS 15.05.11 for Austria as well as TL/TP-KOR, page 87, for Germany – top quality steel constructions.

KH-DS DECK Eisenglimmer

KH-DS DECK Eisenglimmer

micaceous iron oxide pigmented, high build coat based on an alkyd resin combination.

Colours: acc. TL/TP-ING and ÖBB-colours

semigloss high build topcoat with good UV-stability for steel constructions.

REM 61 DB 87 Primer

REM 61 DB 87 Primer

two-component primer coat based on epoxy resin with zincphosphat. Certified according TL/TP KOR Stahlbauten

Colours: RAL 8012, RAL 1002

REM 61 PRIMER

REM 61 PRIMER

Corrosion-protecting 2-component epoxy-zinc phosphate primer coating with excellent adhesion to steel, galvanized and aluminium constructions.

Colours: Beige, red-brown, white

Excellent hardness, elasticity and resistance to solvents, can therefore be used as universal primer coating.

Certifications:
- RVS_Zulassungsurkunden_01.pdf

REMOPLAST EP ZINC

REMOPLAST EP ZINC

2-component epoxy-resin-based zinc dust primer coating with excellent corrosion protection on sandblasted steel.

Colours: grey

Zinc dust primer coating in bridge building, steel underwater construction and general construction.

Certifications:
- RVS_Zulassungsurkunden_05.pdf
- Certifikat_dle_TKP19_EPZINK_HSNANOTECH_CARBON_STEEL_01.pdf

REMOPLAST EP ZINK DB 87

REMOPLAST EP ZINK DB 87

Two-component zinc dust primer based on epoxy resin with accelerated polyamide-adduct curing.

Colours: zinc-grey and reddish grey

Zincdust on pigment: > 94 %. Certified according TL/TP KOR Stahlbauten

REMOPLAST HS UVC NUS

REMOPLAST HS UVC NUS

High Solid 2-component hydroxyl-group containing acrylic resin/aliphatic isocyanate based (polyurethane) top coat with micaceous iron oxide.

Colours: DB color shades

Low temperature and fast hardening.

REMOPLAST HS-TL GLIMMER NUS

REMOPLAST HS-TL GLIMMER NUS

Fast drying High Solid 2-component epoxy resin-based coating with high micaceous iron oxide content and good mechanical strength.

Colours: DB color shades

Low temperature and fast hardening.

REMOPLAST TL 84

REMOPLAST TL 84

two-component coating for protection of steel on concrete touched surfaces and mechanical protectiv coating according to RVS 15.05.11

Colours: approx. to RAL 7032

REMOPLAST TL DB 87 Glimmer

REMOPLAST TL DB 87 Glimmer

two-component intermediate coat, based on epoxy resin, with polyaminoamide-adduct curing, with micaceous iron oxide

Colours: acc. TL/TP-ING

Good resistance to chemicals and oil, high abrasion resistance for steel-construction in high corrosive-load. Certified according TL/TP KOR Stahlbauten.

 

 

REMOPLAST TL GLIMMER

REMOPLAST TL GLIMMER

2-component epoxy resin/polyaminoamide-adduct-based intermediate or top coat with micaceous iron oxide.

Colours: DB color shades

High-quality intermediate coating for steel constructions subject to a high level of corrosivity.

Certifications:
- RVS_Zulassungsurkunden_03.pdf

REMOPLAST TL Sperrgrund

REMOPLAST TL Sperrgrund

Low viscosity, transparent coating based on epoxyresin with low solvent content for concrete.

Colours: transparent

for concrete

REMOPLAST UVC DB87 Glimmer

REMOPLAST UVC DB87 Glimmer

Semigloss high build two-component topcoat based on hydroxyl group containing acryl resins and aliphatic isocyanates with mica and/or micaceous iron oxide. Certified according TL/TP KOR Stahlbauten

Colours: mica-colours according to TL/TP ING RAL

Good resistance to ultraviolet light, weather and chemicals, high abrasion resistance and high gloss resistance

REMOPLAST UVC GLIMMER

REMOPLAST UVC GLIMMER

2K top coating on hydroxyl-group acrylic resin/aliphatic isocyanate-base (polyurethane) with MIO or micaceous pigments

Colours: RAL, NCS

"Satin-gloss, solid-particle-containing top coat, good colour and gloss stability, good chemical resistance According to TL/TP-KOR, sheet 87. High elasticity with good mechanical resistance/abrasion resistance also for all systems in the chemical industry up to 120 °C and for traffic structures (up to corrosiveness class C5 acc. EN ISO 12944/2)"

Certifications:
- RVS_Zulassungsurkunden_10.pdf
- OMV_RefStd_1670_004_01_CS1_01.pdf
- Reinraum_MWZ_03.pdf

REMOSIL OM 101

REMOSIL OM 101

1-component ethyl silicate-based zinc dust primer coating with fast drying. Heat resistant up to 400C, very good corrosion protection.

Colours: grey

At film thickness of up to 100 µm there exists no risk of cracking. Approved for anti-slip screw connections according to DB-TL 918300 Part 2, Sheet 85.

Certifications:
- RVS_Zulassungsurkunden_08.pdf

BASt List according to Sheet 87

REM 61 DB 87 PRIMER

REM 61 DB 87 PRIMER

Corrosion-protecting 2-component epoxy-zinc phosphate primer coating with excellent adhesion to steel, galvanized and aluminium constructions.

Colours: RAL 8012, RAL 1002

Excellent hardness, elasticity and resistance to solvents, can therefore be used as universal primer coating.

REMOPLAST EP ZINK DB 87

REMOPLAST EP ZINK DB 87

2-component epoxy-resin-based zinc dust primer coating with excellent corrosion protection on sandblasted steel.

Colours: zinc-grey, reddish grey

Zinc dust primer coating in bridge building, steel underwater construction and general construction.

REMOPLAST TL DB 87 GLIMMER

REMOPLAST TL DB 87 GLIMMER

2-component epoxy resin/polyaminoamide-adduct-based intermediate coat with micaceous iron oxide.

Colours: acc. TL/TP-ING

High-quality intermediate coating for steel constructions subject to a high level of corrosivity.

REMOPLAST UVC DB 87 GLIMMER

REMOPLAST UVC DB 87 GLIMMER

2K top coating on hydroxyl-group acrylic resin/aliphatic isocyanate-base (polyurethane) with MIO or micaceous pigments.

Colours: mica-colours according to TL/TP-ING appendix H, RAL

Satin-gloss, solid-particle-containing top coat, good colour and gloss stability, good chemical resistance According to TL/TP-KOR, sheet 87. High elasticity with good mechanical resistance/abrasion resistance also for all systems in the chemical industry up to 120 °C and for traffic structures (up to corrosiveness class C5 acc. EN ISO 12944/2)

Certifications:
- Remoplast_UVC_DB87_Glimmer_D_E_03.pdf