Wood-burning stoves, fireplace, fireplace inserts and flue pipes

Wood-burning stoves, fireplace, fireplace inserts and flue pipes

Thermodur is the ideal coating for wood-burning stoves, fireplace inserts and flue pipes. Among its special features are excellent colour retention also at high termperatures and the excellent adhesion to non-blasted substrates.

Thermodur 600 Aqua

Thermodur 600 Aqua

Aqueous 1-component silicone resin coating. Application on shot blasted and non-blasted steel, temperature resistant up to 600°C.

Colours: Available in black, anthracite

Thermodur 600 Aqua – the environment-friendly


Ideal for wood-burning stoves and flue pipes. Thermodur 600 Aqua is a waterborne silicone resin coating and ideal for wood-burning stoves, fireplace inserts, and flue pipes. Excellent colour retention at high temperatures is among its special features.


The coating is resistant to continuous exposure of up to 600°C and can be applied via high pressure atomisation and HVLP.

Thermodur 600 ASS

Thermodur 600 ASS

Silicone resin coating with special cross-linking. Application on shot blasted steel, temperature resistant up to 600°C. No smoke development during first heating.

Colours: Available in black, anthracite, cast grey, umber, silver, etc. (color shade chart on request)

Thermodur 600 ASS –The non-smoker

When a stove is heated to above 200°C for the first time, usually an oxidation or carbonisation process starts during which the organic part of the stove coating (components of the silicone resin) is converted into an inorganic matrix. This is accompanied by a visible smoke development. As for Thermodur 600 ASS, we focussed on avoiding smoke development during first heating.


Because of special cross-links the stove coating cures at room temperature to its final mechanical hardness and as a result does not develop any smoke. The coating, tested by the TÜV Süd as well as by the Austrian Institute of Research, is available in many brilliant colour shades. Optimal for: wood stoves, fireplace inserts and flue pipes, can be exposed continuously to temperatures of up to 600°C.

Thermodur 600 STAN

Thermodur 600 STAN

1-component silicon resin lacquer. Application on blasted and non-blasted steel, temperature resistant up to 600°C

Colours: Available in black, anthracite, cast grey, umber, silver, etc. (color shade chart on request)

Thermodur 600 STAN - economical

Thermodur 600 STAN is the ideal coating for wood-burning stoves, fireplace inserts and flue pipes. Among its special features are excellent colour retention also at high termperatures and the excellent adhesion to non-blasted substrates. This coating can be continously exposed to temperatures up to 600°C and can be applied by high-pressure atomisation and high-volume pressure as well as eletrostatically. Thanks to the wide range of colours, even the most unusal designs can be created with Thermodur 600 STAN.